How To Brace A Wobbly Table | 4 Easy Ways

While searching for a stunning dinner table, stability should be your primary concern. But the notorious wobble is probably one of the biggest concerns for bigger-sized tabletops that people have after purchasing. A wobbly table can be distracting and honestly make it difficult for anyone to focus on enjoying the meal. So if you are facing the same old problem and want to know about the possible solutions then keep on reading out 4 ways How To Brace A Wobbly Table at home.

Is table stability important to you but you’re not quite sure what to do with a wobbly one? Well stick around and we will explain the causes of table instability and how you can go ahead and make sure to avoid the dreaded table at your home.

How To Brace A Wobbly Table (4 Easy Ways)

I’m sure almost all of us have experienced a time when you are sitting at a restaurant at a table and you notice that it’s wiggling back and forth and I don’t know about you but I find that incredibly frustrating. That same thing might happen at home. So our 3 ways to brace a wobbly table should be the solution for you.

1. Using a hidden countertop support plate

If you have a wobbly tabletop in your home and you are thinking of getting rid of it then wait a bit. You can fix it at your home. Installing a hidden countertop support plate is an easy and seamless fix for a wobbly table. This kind of brace is used to add some extra stability to any kind of table. So let’s discuss who you can install it:

Tools That You Need

Drill press
Festool SYS D8 domino connection system
Drill bit
Threaded insert
Connection eclipse

How To Install?

The first thing you need to do is to attach your tabletop from the legs and put it aside. Now place the leg structure of the floor where you are going to flush and install the hidden plates for a strong structure so that the tabletop would sit flat across both the leag and the support plate.

The plate comes predrilled with two holes but you can always customize the hole placement. Now route out a little recess for the plate to sit in utilizing a threaded insert you can attach the plate to the table legs.

Now screw down some screws to attach the top plates on each side with the leg structure where the tabletop is going to sit. Next, you need to place the tabletop on the ground to find out the location of your threaded inserts on the bottom of the tabletop.

Now put your base together resting the tabletop on the top of the base and then using the predrilled holes in the countertop support to guide the drill bit for the threaded insert. Attach the plates to both the leg and the bottom of your tabletop for added strength.

At the last step, all you need to do is put together your apron assembly, attach your base structure, legs and apron to the tabletop itself using the threaded insert and attach some tabletop connection eclipse and you’re done!

2. Use Pl Premium Wood Glue

Using PL premium wood can also solve your wobbly table problem if it has loose wood joints. So you fix those joints you need to follow the instructions down below:

Take a screwdriver and place your table upsidedown to unscrew all the screws that your table has used a screwdriver
Now take your wood glue and apply a generous amount of wood glue on all of the previously loose fittings
You have to be careful while applying the glue because it can be messy
Now when you are applying the glue you also need to screw each of the fittings before the glue gets fully dried up
So that the glue gets into all the joints and makes them stronger
Wipe off the excess glue with a paper towel before it gets fully dried
Use clamps on the joints to get a strong grip and let the glue settle nicely.

3. Use L Shaped Brackets

Adding L-shaped steel brackets can also be a great help when it comes to a wobbly table. These brackets can be installed in all the inside corners or in the leg joints where it is loose. For this, you only need a drill with a smaller drill bit, some screws, and those L-shaped brackets.

First, inspect where the joint is more wobbly and mark the place you want to install the brackets. Where you are done mapping out the areas use a drill to make holes for the brackets. Lastly, screw down the brackets and check if the table is strong enough.

4. Use Adjustable Furniture Levelers

When it comes to a wobbly table it is often seen that the table legs are not all the same size and at least one leg is smaller than the others. So to fix this problem you can use the adjustable furniture levelers that you can just buy online.

You only need to drill a hole according to the size of the furniture leveler and then install the leveler. So that way you can increase or decrease the height of your table leg and make the wobbly go away.

You might also like

Final Verdict

With our 4 of the solutions, you can choose the most suitable one and the one you can apply at your home. If any of these 4 ways how to brace a wobbly table is helpful to you then let us know your thoughts on it.

Frequently Asked Questions (FAQ)

How Do You Stabilize A Wobbly Table?

If your table is wobbly, there are a few things you can do to stabilize it. First, check to see if the legs are all the same length. If they’re not, you can try trimming them down so they’re even.

If that doesn’t work, you can try adding shims to the legs to level the table. Finally, if the table is still wobbly, you can try attaching it to the wall or another piece of furniture. With a little bit of effort, you should be able to stabilize your wobbly table.

How Can I Make My Table More Sturdy?

There are a few things you can do to make your table more sturdy. First, make sure that the legs of the table are evenly spaced and that the table is level. You can also add support braces to the underside of the table or use L-brackets to reinforce the corners. Finally, use thicker or heavier-duty table legs if possible.