Installing a shower head with a handheld feature can be a great addition to your bathroom routine. Having the flexibility to switch between a fixed shower head and a handheld one can enhance your bathing experience and make it more convenient to clean hard-to-reach areas.
However, if you’ve never installed a showerhead with a handheld feature before, the process may seem daunting. Don’t worry, though – with a few simple tools and some basic knowledge, you can install a showerhead with a handheld feature in no time. In this guide, we’ll walk you through the steps How To Install Shower Head With Handheld feature and provide some helpful tips along the way.
How To Install Shower Head With Handheld (10 Easy Steps)
Installing a shower head with a handheld feature is a straightforward process that can be completed in a few simple steps. Follow these instructions to install your new shower head and start enjoying the benefits of a more versatile shower experience.
To install a showerhead with a handheld feature, you’ll need a few basic materials. Here’s a list of what you’ll need:
- Shower head with handheld feature: You can purchase a shower head with a handheld feature at any home improvement or hardware store.
- Teflon tape: Also known as plumber’s tape, Teflon tape is used to create a tight seal around threaded pipes and fittings.
- Adjustable wrench: An adjustable wrench will be necessary to remove your existing shower head and to tighten the new shower head in place.
- Pliers: Pliers will come in handy when removing the old shower head and tightening the new one.
- Towels: You’ll need towels to clean up any water that may leak out during the installation process.
- Step ladder: Depending on the height of your shower, you may need a step ladder to reach the shower head.
- Silicone caulk: If your new shower head has a gasket, you may not need silicone caulk. However, if it does not have a gasket, you’ll need silicone caulk to create a watertight seal.
Step 1: Gather the Required Materials
Before you begin the installation process, gather all the required materials listed above. Make sure you have everything on hand before you start to avoid any unnecessary delays.
Step 2: Turn off the Water Supply
Locate the water shutoff valve for your shower and turn it off. This will prevent water from flowing out while you’re removing the old shower head and installing the new one.
Step 3: Remove the Old Shower Head
Use an adjustable wrench to loosen the old shower head and remove it. If the shower head is stuck, try using pliers to loosen it. Place a towel over the shower arm to protect it from scratches and use the wrench or pliers to twist the shower head counterclockwise until it comes loose. Once you have removed the old shower head, clean the threads of the shower arm with a cloth.
Step 4: Apply Teflon Tape
Wrap Teflon tape around the threads of the shower arm in a clockwise direction. Make sure the tape is wrapped tightly and evenly to ensure a good seal.
Step 5: Install the Bracket
If your new shower head comes with a bracket, install it onto the shower arm. Slide the bracket over the shower arm and twist it into place until it’s secure.
Step 6: Attach the Hose
Attach the hose to the handheld portion of the shower head. Most shower heads with handheld features will have a rubber gasket included that should be inserted into the hose. If your shower head does not have a gasket, apply a small amount of silicone caulk to the threads of the hose before attaching it to the handheld portion of the shower head.
Step 7: Attach the Shower Head
Twist the shower head onto the bracket until it’s tight. Again, use a towel to protect the shower head and bracket from scratches while you’re tightening it. If your shower head does not have a gasket, apply a small amount of silicone caulk to the threads of the shower head before attaching it to the bracket.
Step 8: Turn on the Water Supply
Once the shower head is securely in place, turn on the water supply and check for any leaks. If you notice any leaks, use an adjustable wrench or pliers to tighten the connections.
Step 9: Test the Shower Head
Turn on the shower and test the new showerhead. Switch between the fixed shower head and the handheld feature to ensure both are working properly. Adjust the flow and temperature of the water to your liking.
Step 10: Clean Up
Clean up any excess water and put away all the tools and materials you used during the installation process.
Congratulations, you have successfully installed a showerhead with a handheld feature!
How To Add A Handheld Shower Head To A Bathtub
If you’re looking to upgrade your bathtub’s functionality, adding a handheld shower head can be a game-changer. Not only does it make it easier to rinse off and clean the tub, but it can also provide a more comfortable and versatile shower experience. Here’s how to add a handheld shower head to your bathtub.
Step 1: Choose a Handheld Shower Head
Before you can add a handheld shower head to your bathtub, you need to choose the right one. Look for a shower head with a flexible hose that’s long enough to reach all areas of your bathtub. Make sure it’s compatible with your existing plumbing, and choose a finish that matches your existing fixtures.
Step 2: Turn Off the Water Supply
Locate the water shutoff valve for your bathtub and turn it off. This will prevent water from flowing out while you’re installing the new shower head.
Step 3: Remove the Existing Shower Head
If your bathtub already has a shower head, you’ll need to remove it before you can install the new handheld shower head. Use an adjustable wrench to loosen the shower head and twist it counterclockwise until it comes off.
Step 4: Attach the Diverter Valve
The diverter valve is what allows you to switch between the fixed shower head and the handheld one. Install the diverter valve onto the shower arm where the fixed shower head was located. Wrap Teflon tape around the threads of the shower arm and twist the diverter valve onto it.
Step 5: Attach the Hose
Attach one end of the hose to the handheld portion of the shower head and the other end to the diverter valve. Make sure both connections are tight and secure. If your shower head does not have a gasket, apply a small amount of silicone caulk to the threads of the hose before attaching it to the handheld portion of the shower head.
Step 6: Turn On the Water Supply
Once the shower head is securely in place, turn on the water supply and check for any leaks. If you notice any leaks, use an adjustable wrench or pliers to tighten the connections.
Step 7: Test the Shower Head
Turn on the shower and test the new handheld shower head. Switch between the fixed shower head and the handheld feature to ensure both are working properly. Adjust the flow and temperature of the water to your liking.
Step 8: Clean Up
Clean up any excess water and put away all the tools and materials you used during the installation process.
Adding a handheld shower head to your bathtub can be a great way to enhance your shower experience. Follow these simple steps to add a handheld shower head to your bathtub and enjoy the benefits of a more versatile shower experience.
Conclusion
In conclusion, installing a showerhead with a handheld can be a great way to improve your shower experience. With the right tools and materials, the installation process can be completed in just a few simple steps. Remember to turn off the water supply before beginning, and to follow the manufacturer’s instructions for your specific showerhead and handheld model.
When it comes to installation, you have the option of replacing your existing showerhead with a combination showerhead and handheld or adding a handheld showerhead to your existing setup using a diverter valve. Either way, the installation process is similar and can be accomplished with a few basic tools.
The benefits of having a handheld showerhead include increased flexibility and convenience, as well as the ability to direct water flow where you need it most. Whether you’re rinsing shampoo out of your hair or washing your pets, a handheld showerhead can make your shower experience more enjoyable and efficient.
In the end, installing a showerhead with a handheld is a simple and affordable way to upgrade your shower. By following the steps outlined in this article, you can enjoy the many benefits of a handheld showerhead in no time.
