How To Seal A Septic Tank

Septic tanks are the perfect sewage treatment for houses that are connected to a sewage network. The tank collects and treats domestic wastewater using a bacterial process to decompose waste. It filters the dirty water before recycling it back into the ground. That’s why it is very important to know How To Seal A Septic Tank and the overall maintenance of it for your family’s sake and environmental causes.

Septic tanks are usually made of concrete and have access covers on top. The waste treatment process takes place in separate chambers inside the tank. Let’s discuss How To Seal A Septic Tank they are constructed-

Step 1

First, steel bars called rebars reinforce the concrete structures of the tank. A welder then assembles the rods to form a cage. Then he spots welds the rebar with a mid-welding torch. The welded cage will keep the architectural integrity of the concrete septic tank.

Step 2

The welder then measures the cage’s diagonals to make sure it’s straight. Next, the welder places rebar spacers to hold the cage centered in the frame and leveled on the ground. A crane lowers the cage into a custom formwork made of high-strength steel plates. Then workers close the walls around the form and secure them in place with heavy-duty locks.

Step 3

The crane lowers machined steel cores to form the interior walls of the tank chambers. A rigid plastic tube is inserted inside a rubber sleeve to create a flow hole between chambers. Using an acetylene torch, a worker cuts holes in the rebar for access openings. The mold allows concrete to flow over the rebar and embeds the access opening covers in the septic tank lid.

Step 4

For medium-sized septic, tank worker pours over 1300 gallons of wet concrete into the mold. They use a stick vibrator to eliminate air pockets and level the walls with a putty knife. Next, they mix more concrete and pour it over the top slab rebar. Concrete blocks are used to keep the plastic covers from floating in the wet concrete.

Step 5

Then a worker levels the top of the slab with the trowel. Once the concrete tank has cured, workers strip the forms. They remove the concrete tank using an overhead crane and a compressed air system, which forces the mold away from the concrete tank.

The crane takes the strip core away for cleanup. A worker brushes the top of the walls and sweeps the floor inside the tank. Then he applies a butyl rubber tape around the top of the exterior wall. This is what helps watertight seal between the tank and the lid.

Step 6

An overhead crane lifts the lid out of the formwork and brings it to the tank mold. The crane slowly lowers the lid onto the tank. Workers keep it align to make sure it seals properly. Then the mold is removed from the finished septic tank. This is how a ready-made septic tank is made and it is ready to be installed under your house.

Septic Tank Lid For Sealing

To seal your septic tank properly welders, use different types of lid materials. Usually, septic tank covers are made of concrete slabs that weigh around 100 to 120 pounds, steel, and plastic. Using a lid for sealing your septic tank is very important for many reasons.

It prevents kids, animals, rainwater, or debris from entering the system.
Keeps gasses and odors from exiting
Helps maintain a healthy environment
The lid ensures the system doesn’t collapse

Things To Avoid

To keep your septic tank secure here are some general guidelines to keep in mind

No vehicles over the system
Use the proper bolts and screws to secure the lid
Never leave the lids unattended during installation or maintenance
Teach children that septic tank lids are not to be played with
Use a secondary septic tank lid
Always check the lids for cracks or noticeable damage

Septic Tank Installation

The ready-made septic tank in the ground at the client’s home using a radio remote controlled knuckle coom crane. A medium-sized septic tank will provide a 3-bedroom house with a fully independent sewage system.

You might also like

Final Verdict

Here we’ve discussed the ready-made septic tanks and installation process but these can also be made at home digging holes underground. So if you do not have proper knowledge about How To Seal A Septic Tank we definitely recommend using a professional’s help. Because this can be very tricky work to finish on your own.