Warm water coming out of a hose pipe is like a dream come true during the wintertime. It helps you wash your car or your pets outside without an extra hassle. Some people prefer to connect their hose pipe with their kitchen faucet for warm water. But this might not be a comfortable fit in most cases. So if you’re also wondering how to make hose water warm then you’re definitely in the right place, where we are offering some nice ways to make hose water warm.
How To Make Hose Water Warm?
There are several DIY fixes to make your hose pour warm water any time of the year. So let’s discuss How To Make Hose Water Warm.
1. Keep Your Hose Pipe In The Sun
Keeping hose pipe in the sun is the most common way to get warm water. People like to get warm water during the wintertime or holidays to fill the pool with warm water for their kids, wash their cars, or bathe their pets. When you put the hose pipe in the sun it warms up the pipe and the water in it. But this is not the most desirable way for warm water.
Because this way you only get to have a very little amount of warm water. When the pipe cools down you’ll get the cold water soon.
2. Attach An Adapter With The Kitchen Sink
People who prefer getting hot water from their kitchen sink through the hose pipe are likely to face some problems when they hook up the pipe with the faucet. When you hook up the pipe with the kitchen sink faucet it can get loose and squirt out water pretty easily.
So you can buy an adapter online which helps attach the hosepipe with any faucet tightly without licking. This kind of adapter is very cheap but works just fine for any kind of faucet if you want to get some warm water outside.
3. Install Outdoor Hot And Cold Water Faucet For Hose Pipe
Many people have an outside garden faucet to water their plants or for car washing or for otter reasons. So if you also have one then this fix is for you.
Mostly outside garden faucets provide cold water. But you can easily turn it into a hot and cold faucet like your kitchen sink. If you want to add hot water to your outside garden faucet what you can typically do is drill a hole beside your current faucet from where you’ll connect a hot water line outside. But the usual kind of faucet might not work during the cold weather because it might freeze.
So what you’ll need here is to install a frost-proof wall hydrant faucet that will not clog during wintertime. Before starting the installation turn off the main water line. Using a compact cutter you can cut the copper water line and remove the existing garden faucet. Now disconnect the old faucet from outside.
Now measure the distance between the faucet water lines so you know how far you need to drill through. Now drill a hole big enough to fit the new faucet lines. Loosen and remove the stem units so you won’t damage the washer.
Add a nice thick beat of silicon to the back of the hydrant that will make a watertight seal to the vinyl and secure the hydrant in place with all-weather screws. Now you need to connect the hot and cold water lines to your new hydrant using copper pipe and fittings on soft shutoff valves for any future service.
Now to attach your hose pipe with the new faucet attach a yoke to poke between both faucets and then when you’ll do that you open up hot and cold water lines and it’ll mix right there. It might look a little jury-rigged a little clunky. But it’ll do the work just fine as you like it.
4. Use A Self-heated Hose Pipe
Using a self-heated hose pipe for your outside work is a good and safe option. So for this, you can use a No-Freeze water hose pipe. Now to install the new heated hose pipes take out the old ones. Use a brass angle to make sure that there is no torque on the outlet. Use some white PTFE tape on every connection.
Definitely use a 12-inch heat trace pigtail on the end. This will stop the brass fitting from freezing as well. The other end of this will go to the power. You can get an extension cord that you can use for the electric connections. This way you can get warm water out from your hose pipe all year round.
You might also like
- How To Flatten Warped Wood Table Top
- 5 Simplest Ways Of How To Remove Bark From A Log
- 5 Easiest Ways of How to Remove Spray Adhesive
- How to Extend The Gas Line for Dryer
- How to Remove a Porch Roof
Final Verdict
There are some other DIY ways that you can use to get warm or hot water out from your hose pipe to fill out your kid’s pool or wash your car or bathe your pets anytime you want. But be sure to ensure safety precautions. So we hope you know how to make hose water warm and will use one of these fixes.
Frequently Asked Questions (FAQ)
Why Is My Hose Water Warm
If you’re wondering why your hose water is warm, there are a few possible explanations. It could be that the water in your hose has been sitting in the sun for a while and has warmed up as a result. Alternatively, if you have your hose connected to a water heater, the water in the hose may be the same temperature as the water in the heater. In either case, there’s no need to worry, as the water in your hose is still safe to use.
Can You Run Hot Water Through A Garden Hose
A garden hose can be used to provide hot water to a home or garden. The water can be heated using a variety of methods, including a campfire, a stove, or an electric heater. The hose should be made of a material that can withstand high temperatures, such as rubber or PVC. The water temperature should be monitored carefully to avoid scalding.
Connect Hose To Hot Water Tap
It is easy to connect a hose to a hot water tap, and this can be done in a few simple steps. First, locate the hot water tap and make sure that the water is turned off. Next, take the hose and connect one end to the tap. Be sure to screw the hose on tightly so that there is no water leakage. Finally, turn on the water at the tap and check for any leaks. If there are no leaks, then you have successfully connected the hose to the hot water tap.
Adapter To Make Hose Water Warm
If you’re looking for an easy and inexpensive way to make your hose water warmer, an adapter is a way to go. With a few simple supplies, you can make a hose adapter that will allow you to control the temperature of your hose water. Here’s what you’ll need:
-A length of PVC pipe
-A PVC elbow
-A PVC T-joint
-A faucet adapter
-A garden hose
To make the adapter, start by cutting the PVC pipe into two pieces. One-piece should be about 6 inches long, and the other should be about 12 inches long. Next, take the PVC elbow and attach it to one end of the 6-inch piece of pipe. Then, take the PVC T-joint and attach it to the other end of the 6-inch piece of pipe. Finally, attach the faucet adapter to the end of the 12-inch piece of pipe.
To use the adapter, simply attach the garden hose to the faucet adapter and turn on the water. You can then use the valves on the PVC T-joint to control the temperature of the hose water. If you want hot water, simply turn the valve on the hot water side of the T-joint. If you want cold water, turn the valve on the cold water side of the T-joint. And if you want a mix of hot and cold water, turn both valves on.
With this handy adapter, you’ll never have to worry about cold hose water again!
